Magic: The Gathering coaster - Design Tech Project



What is your project?

This is my coaster set and coaster holder, based on a card game I play called Magic: The Gathering. In Magic, there are 5 colors of cards, as well multi-color and colorless cards. Most color combinations have a symbol. Each coaster represents one of those colors, with the places it overlaps with other colors being the color combination with those colors. Half of the 3-color combinations have no symbol, so I used some fan-made designs that are based on some cards from those colors. The 4-color combinations also have no symbol, so I used the symbol of the color that is not in that combination. The coaster holder is made of walnut plywood and wooden rods, and the coasters are made out maple wood.

How did you make it?

I made the coasters on the laser cutter using a design I made in Adobe Illustrator. The coaster holder was cut out on the CNC Router, and I cut a wood rod into 5 for the 5 pegs. I glued the pegs to 5 holes in the coaster holder. 

What do you like most about your project?

I think that it look really cool and represents each color well.

What was challenging about this project?

During design, I designed my coaster in a really weird way that caused me to waste a bunch of time trying to cut lines so I could make the borders red so the laser cutter would cut there before I realized I could just drag a red outline on top of the coaster so it would cut there.

What would you change about the project if you did it again?

I would probably try to be more precise when making it in Illustrator. Also, I needed to make the pegs a little big longer and i might have used 1/4th inch wood instead of 1/8th inch.

What is your plan for it now that it's done?

I hope to use it, but don't know if I actually will.



Comments

Popular posts from this blog

Geometric Coasters - Leo Rosin

Coastal Coasters

Album Cover Coasters - Design Tech Project